What Are The Ways On How You Can Do DIY Speaker Rings
You may not know about it but making DIY speaker rings can be an easy and quick way of saving some money, especially if you are willing to spend a little time to set them up. For the remainder of this article, you will learn about the ways DIY speaker rings are made. Before anything else, what we want you to do first is to make a list of all the tools and equipment you will need in making DIY speaker rings. You have the option of creating your DIY speaker rings through free-hand cutting, yet, if you want to obtain a more professional result, the best thing that you can do is to get a guide. Talking about guide or guide tools, one thing about it that we want you to know of is the fact that they are pieces of stock aluminum that have Roto-zips mounted on one size, with staggered holes that are drilled down its length. In the event that you do not have a Roto-Zip, you can make use of a jig saw.
Moving on to the process of making a DIY speaker ring, what we want you to do is to first is to cut our a large circle in MDF. For a basic speaker ring that is intended for a subwoofer, or any other speaker, you have to create a circle that is at least one inch larger in comparison to the largest part of the speaker. For instance, the sub-woofer that you have reaches twelve inches, this means that you have to cut out a thirteen inches circle. When it comes to the hole in the tool, make it a point to ensure that you are using six and a half inches from the bit. Once you have checked the distances, you must put a small screw through the correct hole, though you have to leave enough of the screw out to enable the cutting jig to freely spin.
The next thing that you have to do when making a DIY speaker ring is to create the inside cut. When making the inside cut, you have to make sure that it is at least the size of the speaker basket. Let us say, you have a twelve inches speaker, that means that you have to make a cut that is at least eleven inches. This goes to show how you have to set your guide or guide tool at five point five inches and repeat the steps mentioned above.
Once you are sure of all the measurements of your speaker rings, it is now right to proceed with the next step which is to sand down any high or rough spots.
These and all are the thing that you need to know regarding DIY speaker rings.